Indicated wieght: actual amount of printable material.
PolyMide™ PA6-GF is a glass fiber reinforced PA6 (Nylon 6) filament. The material exhibits excellent thermal and mechanical properties without sacrificing the layer adhesion.
|Recommended settings||Mechanical properties||Thermal properties||Notes|
|Printing temp.: 280-300°C||Young's modulus: 4431±184 (MPa)||Heat deflection temperature (ISO 75 1.8 MPa): 157°C||Drying Settings:
80˚C for 12h
|Printing speed: 60mm/s||Tensile strength: 84.5±2.1 (MPa)||Heat Deflection Temperature
(ISO 75 0.45 MPa):
|Recommended Support Materials:
|Bed temp.: 25-50°C (do NOT exceed 50°C)||Bending strength: 136.4±1.6 (MPa)||Melting Temperature:
Annealing 80℃ 6h
|Bed surface: almost any surface with a thin coat of 3DLac||Charpy impact strength: 16.5±0.5 (kJ/m²)|
We highly recommend to use a wear resistant nozzle.
PolyMide™ PA6 GF features Polymaker's Warp-Free™ technology and Fiber Adhesion™ technology:
Warp-Free™ technology enables the production of Nylon-based filaments that can be 3D printed with excellent dimensional stability and near-zero warpage. This is achieved by the fine control of microstructure and crystallization behavior of Nylon, which enables the material to fully release the internal stress before solidification.