PVA-S 1.75mm soluble filament

Your cart has been successfully updated.
An error occured while trying to update your cart.
  • PVA-S 1.75mm soluble filament
500g of soluble PVA-S filament 1.75mm
Indicated wieght: actual amount of printable material.
Out of stock
Need some help to chose your filament? Take a look at this link "Everything about... THE FILAMENTS"
________________________

PVA-S  is our specially developed water soluble solution for dual extrusion when you need to print with styrene based materials. PVA-S has an excellent adherence to ABS, ABS-X, ASA-X, GLASSBEND and TPU98A. PVA-S dissolves slightly slower than regular PVA and it is advised to dissolve in luke-warm water, preferably in circulated water. PVA-S can handle higher nozzle temperatures (<250°C) without the risk of cross linking and clogging the nozzle and is therefore perfect for printing with styrene based materials which typically print at higher temperatures.

PVA-S features:

  • Great adhesion to styrene based materials
  • Stable at higher nozzle temperatures (<250°C)
  • Performs in heated environments up to 55-60 °C
  • Good dissolvability in luke warm water
  • Waste can be disposed with household effluent (*)
Dimensions
Physical properties
Description Testmethod Typical value
Specific gravity ISO 1183 1,19 g/cc
MFR 190˚C / 21,6 kg ISO 1133 58 g/10 min

Thermal properties
Description Testmethod Typical value
Printing temp. eM-T 245±10ºC

Additional info:
Recommended temperature for heated bed is >60˚C. Do not exceed a printing temperature of 260˚C for a prolonged period. PVA-S works with most of the common adhesives.
The speed at which the product dissolves in water is dependent on the volume of the printed object, the amount and the temperature of the water. Higher water temperature (up to 70˚C is no problem) will accelerate the dissolution. Keep in account that the temperature of the water is based on the properties of the material that you are printing with PVA-S to avoid warping issues.
PVA-S can be used on most Dual printing desktop FDM or FFF technology 3D printers.

(*)This material is not fully biodegradable but can be disposed of through the household drain with an excess of water.

Storage:
Cool and dry (15-25˚C) and away from UV light. This enhances the shelf life significantly. If you remove the spool out of the vacuum bag packaging and you do not store it in a room with low moisture content, we advise you to properly dry the material before printing to avoid any quality issue.

Share