eMotion Flex 1.75mm Red 500g

Your cart has been successfully updated.
An error occured while trying to update your cart.
  • eMotion Flex 1.75mm Red 500g
500g of eMotion Flex 1.75mm Red (RAL 3020)
Indicated wieght: actual amount of printable material.
Out of stock
Need some help to chose your filament? Take a look at this link "Everything about... THE FILAMENTS"
________________________

The eMotion Flex is a very flexible rubber replacing filament for 3D printing. The combination of flexibility, mechanical strength, durability and good resistance to chemicals and extreme temperatures makes it a unique filament. Finally eMotion Flex exhibits excellent UV resistance.
The eMotion Flex needs to be printed at high temperature (~250°C), and low speed (~20mm/s), heatbed at 90°C, reduce the retraction and the acceleration of the extruder.

Features:
• Very flexible
• Strong
• Long term heat resistant
• Good chemical resistance
• UV resistant

 
Dimensions
Size   Ø Tolerance Roundness
1,75mm ± 0,05mm ≥ 95%
2,85mm  ± 0,10mm ≥ 95%





 
Physical properties
Description  Testmethod   Typical value
Specific gravity ISO 1183 1,14 g/cc
Melt volume flow rate ISO 1133 39 cm³/10 min
Stress at break ISO 527 24
Strain at break ISO 527 530,00%
Tensile modulus ISO 527 95 MPa
Impact strength
Charpy method 23˚C		 ISO 179 Notched No break
Shore D Hardness ISO 868 45













 
Thermal properties
Description  Testmethod  Typical value
Printing temperature - 220-260˚C
Melting temperature ISO 11357 180˚C
Share